How to Prevent, Maintain, and Clean LED Bay Lights

by Sergio Clark
0 comment

What is high efficacy lighting? It refers to any light source that produces high lumens per watts. The more the lumens in a bulb, the more light/brightness is produced, and fewer lumens produce a little amount of light. Efficacy is the measure of how well a source of light gives off visible light. Just like every other object, LED bay lights need to be taken care of to keep them working effectively, provide high-quality illumination, and have a long lifespan. We look at the tips on prevention, maintenance, and cleaning of LED bay lights down below.

Tips on Prevention, Maintenance, and Cleaning of LED bay lights

1. Prevention

a. Clean the Surface

Before installing the product, clean the designated area to remove all dust particles or debris. It can be done by rubbing alcohol on the surface. Sand down rough surfaces like walls or wooden materials to allow the mounting option to stay firm and secure. The process of installation is usually straightforward, and a clean space makes it more accessible.

b. Handle with Care

LED bay lights contain delicate components that can loosen and get lost or even break in the case of excessive contact. A lot of care should be considered during transportation, and skilled personnel must install the light to reduce contact between different people.

c. Limit Exposure to Moisture

Prolonged exposure to moist air or water may reduce the efficiency of the product. The adhesiveness may become non-existent, and the components inside may rust and eventually break.

2. Maintenance

a. Clean Occasionally

Cleaning does not cease during installation. For good looking and functioning lights, dusting from time to time is highly recommended. Use microfiber cloth that is dry and has a soft feel to avoid adding scratches on the LED surface. Materials that snag or get stuck on the components should not be used.

b. Fasten the Connection Points

LED lights have a long lifespan and can last up to 10 years. They degrade and undergo wear and tear over time, which is a normal process. Some points may loosen, causing the bulb to flicker when turned on. Check the connection points often and secure them firmly around the affected area to increase longevity.

3. Cleaning

a. Stain Removal

Few people result in cleaning their LED products, and it a very vital step in their maintenance. When stains accumulate over time, they block the amount of light passing through the lens; hence, the clarity is reduced significantly in commercial kitchens. The bay lights installed at lower heights like those under kitchen cabinets, should be cleaned immediately once any liquid gets on them.

b. Removal of Dried Residue Or Debris

Use warm water, a soft cloth, and dab gently on the affected area. Sticky residues like oils can be removed by rubbing alcohol on the surface. Do not scrub or use a snagging cloth.

c. Use Gentle Cleaning Agents

LED lights are susceptible, and harsh chemicals should not be used on them. It may cause corrosion and later lead to them failing.


LED high bay lights are expensive. Thus, proper care must be given to them to reduce the cost of replacement now and then. Meaning, if your lighting system is to last long up to the 50000 hrs life span and be able to serve you right every minute, care and maintenance is the in-thing you better stick to always.

You may also like

Leave a Comment